|
|
Liquid electrolytes for lithium-ion accumulators
Štichová, Zuzana ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
The aim of this master´s thesis was the measurement of electrical conductivity and dynamic viscosity of the electrolytes. Based on these measurements to verify Walden theorem between measured variables. Electrolytes were used on sulfolane base in combination with propylene carbonate and salt. The thesis also deals with the measuring method of dielectric properties of electrical and optical method with a refractometer. The freezing point of combination of sulfolan and propylene carbonate were determined by cryoscopy.
|
|
|
Impact of technological parameters on electrochemical properties of negative electrode in lithium-ion battery
Živčic, Samuel ; Máca, Josef (referee) ; Libich, Jiří (advisor)
This bachelor thesis deals with the issue of li-ion batteries and consists of two main parts. The first part of the thesis deals with a theory. It describes the functionality of electrochemical cells, especially li-ion cells. Operational principle of the cell is discussed, with the main focus given on negative electrode (anode) and the material it consists of, the natural graphite, mainly his electrochemical properties. Last chapter of theory describes expected impact of technological parameters on electrochemical properties of negative electrode. The second part of the thesis is the practical part. First, it describes procedure of making electrodes in laboratory and afterwards it provides an explanation of used measuring methods, steps taken during the measurement, and the results of the measurements. At the end of the thesis, the influence of pressure and layer thickness on electrochemical properties of natural graphite and on capacitive and current characteristics of negative electrode is evaluated.
|
|
|
Study of the properties of the advanced materials for the cathodes of the lithium-ion accumulators
Pustowka, Pavel ; Tichý, Jiří (referee) ; Kazda, Tomáš (advisor)
This thesis in its first part deals especially with characteristic of lithium ion accumulators in terms of their structure, electrochemical properties and also features of the most commonly used cathode materials. Especial attention is given to the high-voltage cathode material LiNi0,5Mn1,5O4 which cell voltage is close to 5V. The second practical part deals with the preparation of cathode materials based on LiNi0,5Mn1,5O4 with different temperatures in the second stage of annealing and analyzing them in terms of structure and electrochemical properties using appropriate measuring methods.
|
|
| |
|
|
Study of materials for the Li-ion batteries by electron microscopy
Hujňák, Jan ; Čudek, Pavel (referee) ; Kazda, Tomáš (advisor)
This work deals with problems of lithium-ion batteries. In the theoretical part are described electrochemical sources in general and their division. The main representatives of individual types of electrochemical sources are described in more detail. In the next part the thesis focuses specifically on lithium-ion accumulators, their history, electrochemical reactions taking place inside and materials of individual parts of which the accumulator consists. Next part focuses on electron microscopy and its division into scanning and transmission. Basic parts and the principle of operation are described. The practical part is focused on creating a small cell for examination under an electron microscope.
|
|
|
Single wheel vehicle
Hanuš, Radek ; Boušek, Jaroslav (referee) ; Háze, Jiří (advisor)
The main aim of this thesis is to design and build a self-balancing vehicle similar to a skateboard, utilizing only one wheel located in the centre of the device. The steering will be controlled by driver‘s tilt and the ride will resemble snowboarding or surfing. The initial part focuses on a comparison between commercially available devices. Frequently used components and their main attributes are described in the next part. After that, a possible solution is outlined, followed by an electrical design and firmware‘s function explanation. Final build, its set-up and overall results are summarised in the last part of this thesis.
|
|
|
Electrochemical properties of negative electrode made from natural and expanded graphite
Priščák, Juraj ; Máca, Josef (referee) ; Libich, Jiří (advisor)
This bachelor thesis deals with lithium-ion accumulators from the prespective of its structure, operation and using. It studies anode materials, focusing on natural and expanded graphite. Explains operation and structure of lithium-ion accumulator. The second part of thesis aims on manufacturing of anode electrodes of natural and expanded graphite. Deals with their measurement of its current a capacity rating. The aim of the thesis is how characteristic of accumulator depends on features of anode materials. In conclusion is sum up and comparation both materials on base of their measurement.
|
|
|
Study of materials for the Li-ion batteries by electron microscopy
Hujňák, Jan ; Čudek, Pavel (referee) ; Kazda, Tomáš (advisor)
This work deals with problems of lithium-ion batteries. In the theoretical part are described electrochemical sources in general and their division. The main representatives of individual types of electrochemical sources are described in more detail. In the next part the thesis focuses specifically on lithium-ion accumulators, their history, electrochemical reactions taking place inside and materials of individual parts of which the accumulator consists. Next part focuses on electron microscopy and its division into scanning and transmission. Basic parts and the principle of operation are described. The practical part is focused on creating a small cell for examination under an electron microscope.
|
|
|
Impact of technological parameters on electrochemical properties of negative electrode in lithium-ion battery
Živčic, Samuel ; Máca, Josef (referee) ; Libich, Jiří (advisor)
This bachelor thesis deals with the issue of li-ion batteries and consists of two main parts. The first part of the thesis deals with a theory. It describes the functionality of electrochemical cells, especially li-ion cells. Operational principle of the cell is discussed, with the main focus given on negative electrode (anode) and the material it consists of, the natural graphite, mainly his electrochemical properties. Last chapter of theory describes expected impact of technological parameters on electrochemical properties of negative electrode. The second part of the thesis is the practical part. First, it describes procedure of making electrodes in laboratory and afterwards it provides an explanation of used measuring methods, steps taken during the measurement, and the results of the measurements. At the end of the thesis, the influence of pressure and layer thickness on electrochemical properties of natural graphite and on capacitive and current characteristics of negative electrode is evaluated.
|
|
|
Electrochemical properties of negative electrode made from natural and expanded graphite
Priščák, Juraj ; Máca, Josef (referee) ; Libich, Jiří (advisor)
This bachelor thesis deals with lithium-ion accumulators from the prespective of its structure, operation and using. It studies anode materials, focusing on natural and expanded graphite. Explains operation and structure of lithium-ion accumulator. The second part of thesis aims on manufacturing of anode electrodes of natural and expanded graphite. Deals with their measurement of its current a capacity rating. The aim of the thesis is how characteristic of accumulator depends on features of anode materials. In conclusion is sum up and comparation both materials on base of their measurement.
|
guest ::
